Pulse-Jet Pleated Collectors

Features/Overview


For applications requiring 211 to 1,960 ft2 of cloth area per unit with 20", 40", 54" long filters.

LIBERATOR pleated element collectors provide an industry leading design.  To ensure consistent performance we have tuned our pleated collectors around OEM filter characteristics. Can velocities, interstitial velocities, and periphery face velocities have been calculated for each unit. We then configured our collector design with these critical operating factors.
 
Pleated element collectors can provide a better alternative to applications suited for a cartridge type collector.  Providing a powerful amount of collection in a small footprint, the LIBERATOR pleated element collectors embrace the latest technology advancements.

Pleated Collector Features

  • Compact advanced pleated design provides more filter area per square foot of collector floor space than traditional cartridge collectors.
  • Low profile design suitable for indoor installation.  Long duct runs and insulation requirements are often eliminated reducing both initial install costs and daily energy consumption.
  • Provides increased filtering capacity for high efficiency application flexibility.
  • Economical solution to meet ever-increasing regulatory requirements.
  • Welded 10 ga. carbon steel construction.
  • Operating temperatures to 200 °F.
  • Filters are changed from the clean side of the collector housing. Operators are not in direct contact with toxic or valuable collected product. Fugitive emissions associated with dirty side change-outs (typical cartridge collector) are eliminated.
  • Low compressed air requirements save energy costs.  

Comes Complete With

  • Spun Bond Polyester filters using EPA/ETV verified media.
  • Double diaphragm pulse valves and compressed air manifold system with NEMA 4 solenoid pilot valve enclosures.
  • Programmable solid-state timer controls in a NEMA 4 enclosure. Pre-wired and set-up for continuous cleaning.  
  • Structural steel support.
  • Primed and painted with industrial grade enamel.

Options

  • NEMA 7 or 9 controls for potentially explosive environments.
  • Stainless steel construction for corrosive applications.
  • Aramid, PPS, PTFE Membrane, and other filter medias available. Hydro and Oleo phobic treatment, and grounding options.
  • High temperature configurations.
  • Explosion panels.
  • Custom discharge height.
  • Pressure readout gage.
  • Discharge drum cover kits and slide gates.
  • Clean on demand controller.
  • System engineering and install services available.

Specs

Model Filter Information Approximate Dimensions
Number
of Filters		 Length
of Filters		 Number
of Pleats		 Cloth
Area (ft.2)		 A B C
44-PPR-20-40 16 20.4" 40 211 3'-6" 3'-6" 7'-4"
44-PPR-40-40 40.4" 422 9'-0"
44-PPR-54-40 54.4" 570 10'-3"
55-PPR-20-40 25 20.4" 40 330 4'-4" 4'4" 8'-0"
55-PPR-40-40 40.4" 660 9'-11"
55-PPR-54-40 54.4" 891 10'-10"
65-PPR-20-40 30 20.4" 40 396 5'-2" 4'-4" 8'-9"
65-PPR-40-40 40.4" 792 10'-5"
65-PPR-54-40 54.4" 1,069 11'-7"
75-PPR-20-40 35 20.4" 40 461 6'-0" 4'-4" 9'-5"
75-PPR-40-40 40.4" 924 11'-1"
75-PPR-54-40 54.4" 1,247 12'-11"
85-PPR-20-40 40 20.4" 40 528 6'-10" 4'-4" 10'-1"
85-PPR-40-40 40.4" 1,056 12'-7"
85-PPR-54-40 54.4" 1,425 13'-9"
95-PPR-20-40 45 20.4" 40 594 7'-8" 4'-4" 10'-10"
95-PPR-40-40 40.4" 1,188 13'-4"
95-PPR-54-40 54.4" 1,603 14'-6"
105-PPR-20-40 50 20.4" 40 660 8'-8" 4'-4" 11'-6"
105-PPR-40-40 40.4" 1,320 14'-1"
105-PPR-54-40 54.4" 1,782 15'-3"
115-PPR-20-40 55 20.4" 40 725 9'-4" 4'-4" 12'-4"
115-PPR-40-40 40.4" 1,451 14'-6"
115-PPR-54-40 54.4" 1,960 15'-8"

Call us at (800) 686-9297 or fill out the form below.
 

Download the Request for Quote form

Applications

Abrasive Blasting
Acrylic Plastic
Air Blasting
Aluminum
Aluminum Blasting
Aluminum Oxide
Arc Spray
Bead Blast Dust
Blast Dust
Blast Rooms
Brake Shoe Dust
Brick
Carbide Tool Dust
Carbon Black
Cardboard Dust
Cast Iron Grinding
Cement
Ceramic
Chemical Processing Chrome Oxide
Chrome Polishing
Clay
Color Pigments
Corn Seed Dust
Corrugators
Crushed Rock
Steel
Dried Soap Lubricant Dust
Dye Powders
Feldspar
Fertilizer Fine Powder
Flame Spray
Fiberglass Fine Grinding		 Fine Wood Sanding
Flours
Fumed Silica
General Ventilation
Glass Making
Grain/Agriculture
Granite
Graphite
Grinding
Grit Blasting
Ground Powder
Gypsum
Hard Foam Dust
Incinerator Ash & Sand
Iron and Chrome
Iron Casting Sand
Laser Cutting Fumes
Lime Dust
Light Carbon Dust
Lumber Mills
Marble Dust
Metal
Metal Flame Spray
Mica
Mill Dust
Mill Transfer Points
Mining
Nickel Dust
Nickel Salt
Nuisance Dust
Paper
Phenolic Castings
Pigments
 		 Plasma Cutting
Plasma Spray
Plaster Dust
Plastic Blast Beads
Plastic Media Blasting
Pneumatic Conveying Powder Spraying
PVC Grinding
Raw Agricultural Products Rubber Grinding
Rubber Recycling
Sand
Sand Blasting
Sanding
Sawdust
School Wood Shops
Seed Processing
Shot Blast Material
Silica
Starch
Steel De-burring
Steel Grit
Steel Shot Blast
Styrene Dust
Talc
Thermal Spray
Tire Manufacturing
Ventilation
Welding Fume
Wheel Blasting
Wood

 

Contact Us

(800) 686-9297

Call us toll-free, email or fill out the convenient contact form below.