Pulse-Jet Bin Vents

Features/Overview


For applications requiring 211 to 891 ft2 of cloth area per unit with 20", 40", 54" long filters.

LIBERATOR bin vents bring pleated filter technology to container venting and dust recovery.
 
LIBERATOR bin vents provide additional filter surface area in a compact design for high efficient applications involving storage bins, silos, or conveyor transfer points. 

Features

  • Ships completely assembled for rapid installation.
  • Units install directly on bins and silos via the supplied flanged inlet.  Ductwork is eliminated and installation expenses reduced.
  • Low compressed air requirements save energy costs.
  • Welded all steel construction provides long-term reliability with minimum maintenance requirements.
  • Compact, advanced pleated design provides increased filtering capacity for high efficiency application flexibility. 
  • Economical solution to meet ever-increasing regulatory requirements.
  • 1-1/2" pulse valves ensure filters clean during heavy loading.
  • Filters are changed from the clean side of the collector housing. Operators are not in direct contact with toxic or valuable collected product. Fugitive emissions associated with dirty side change-outs (typical cartridge collector) are eliminated.
  • Operating temperatures to 200 °F.

Comes Complete With

  • Spun Bond Polyester filters using EPA/ETV verified media.
  • Double diaphragm pulse valves and compressed air manifold system with NEMA 4 solenoid pilot valve enclosures.
  • Programmable solid-state timer controls in a NEMA 4 enclosure. Pre-wired and set-up for continuous cleaning.  
  • Primed and painted with industrial grade enamel.
  • Flanged inlet with safety mesh.

Operating Requirements

  • 115 VAC, 60 Hz. single phase current required for sequence timer
  • 90 to 100 PSIG clean, dry, uncontaminated compressed air supply.

Options

  • NEMA 7 or 9 controls for potentially explosive environments.
  • Stainless steel construction for corrosive applications.
  • Aramid, PPS, PTFE Membrane, and other filter medias available. Hydro and Oleo phobic treatment, and grounding options.
  • High temperature configurations.
  • Explosion panels.
  • Custom discharge height.
  • Pressure readout gage.
  • Clean on demand controller.
  • Service platform.
  • Exhaust rain hood with mesh protection.
  • Hopper configuration for remote installations.
  • System engineering and install services available.         

Specs

Model Filter Information Approximate Dimensions
Number
of Filters		 Length
of Filter		 Number
of Pleats		 Cloth
Area		 A B C
44-PPB-20-40 16 20.4" 40 211 ft.2 42" 42" 58"
44-PPB-40-40 40.4" 422 ft.2 78"
44-PPB-54-40 54.4" 570ft.2 92"
55-PPB-20-40 25 20.4" 40 330 ft.2 52" 52" 58"
55-PPB-40-40 40.4" 660 ft.2 78"
55-PPB-54-40 54.4" 891ft.2 92"

Call us at (800) 686-9297 or fill out the form below.
 

Download the Request for Quote form

Applications

Abrasive Blasting
Acrylic Plastic
Air Blasting
Aluminum
Aluminum Blasting
Aluminum Oxide
Arc Spray
Bead Blast Dust
Blast Dust
Blast Rooms
Brake Shoe Dust
Brick
Carbide Tool Dust
Carbon Black
Cardboard Dust
Cast Iron Grinding
Cement
Ceramic
Chemical Processing Chrome Oxide
Chrome Polishing
Clay
Color Pigments
Corn Seed Dust
Corrugators
Crushed Rock
Steel
Dried Soap Lubricant Dust
Dye Powders
Feldspar
Fertilizer Fine Powder
Flame Spray
Fiberglass Fine Grinding		 Fine Wood Sanding
Flours
Fumed Silica
General Ventilation
Glass Making
Grain/Agriculture
Granite
Graphite
Grinding
Grit Blasting
Ground Powder
Gypsum
Hard Foam Dust
Incinerator Ash & Sand
Iron and Chrome
Iron Casting Sand
Laser Cutting Fumes
Lime Dust
Light Carbon Dust
Lumber Mills
Marble Dust
Metal
Metal Flame Spray
Mica
Mill Dust
Mill Transfer Points
Mining
Nickel Dust
Nickel Salt
Nuisance Dust
Paper
Phenolic Castings
Pigments
 		 Plasma Cutting
Plasma Spray
Plaster Dust
Plastic Blast Beads
Plastic Media Blasting
Pneumatic Conveying Powder Spraying
PVC Grinding
Raw Agricultural Products Rubber Grinding
Rubber Recycling
Sand
Sand Blasting
Sanding
Sawdust
School Wood Shops
Seed Processing
Shot Blast Material
Silica
Starch
Steel De-burring
Steel Grit
Steel Shot Blast
Styrene Dust
Talc
Thermal Spray
Tire Manufacturing
Ventilation
Welding Fume
Wheel Blasting
Wood

 

Contact Us

(800) 686-9297

Call us toll-free, email or fill out the convenient contact form below.