Extended Pulse Jet

Extended Pulse-Jet Baghouse Walk-In Access

For applications requiring 4,606 to 16,592 ft2 of cloth area per unit with 10' or 12' long filter bags.

Features like our exclusive Filter Fit System™ have been developed to provide a positive mechanical-assist seal at the tube sheet in all of our LIBERATOR bag house collectors.

An exacting, reinforced venturi and rolled bottom cup cage are stabilized to provide superior support ensuring a focused, efficient pulse for accurate filter clean down and performance where it counts the most.

Additional Extended Features

  • Extended housing provides more filtering capacity for higher volume or extreme efficiency applications.
  • Modular design for application and volume flexibility.
  • Snap-in filter tube sheet design.
  • Welded 10 ga. carbon steel construction.
  • Operating temperatures to 275 °F.

Comes Complete With

  • 100% Polyester filters with double beaded stainless steel snap band.
  • Rugged 12 wire filter support cages with reinforced integral venturi.
  • Double diaphragm pulse valves and compressed air manifold system with NEMA 4 solenoid pilot valve enclosures.
  • Programmable solid-state timer controls in a NEMA 4 enclosure. Pre-wired and set-up for continuous cleaning.
  • Caged ladder and access platform designed to meet OSHA safety requirements.
  • Structural steel support.
  • Primed and painted with industrial grade enamel.
  • Download Product Sheet

    Click to download the Product Sheet

  • Bags can be changed and the unit maintained from the clean side of the collector housing. Operators are not in direct contact with toxic or valuable collected product.
  • The collector system can be located outside, not taking up prime production floor space.
  • Reclaimed product is protected from rain and snow during maintenance and inspections.
  • Emergency filter change-outs performed quickly regardless of the weather, making the walk-in plenum collector suitable for critical operations requiring minimal down time.
  • NEMA 7 or 9 controls for potentially explosive environments.
  • Stainless steel construction for corrosive applications.
  • Aramid, P84 (Polymide), PTFE Membrane, 100% White Teflon,
  • Polypropylene, Fiber Glass and other filter medias.
  • 500°F operating temperature configurations.
  • Explosion panels.
  • Custom discharge height.
  • Pressure readout gage.
  • Rotary valve or other specified discharge equipment.
  • Clean on demand controller.
  • System engineering and install services available.
Abrasive Blasting
Acrylic Plastic
Air Blasting
Aluminum
Aluminum Blasting
Aluminum Oxide
Arc Spray
Bead Blast Dust
Blast Dust
Blast Rooms
Brake Shoe Dust
Brick
Carbide Tool Dust
Carbon Black
Cardboard Dust
Cast Iron Grinding
Cement
Ceramic
Chemical Processing Chrome Oxide
Chrome Polishing
Clay
Color Pigments
Corn Seed Dust
Corrugators
Crushed Rock
Steel
Dried Soap Lubricant
Dust
Dye Powders
Feldspar
Fertilizer Fine Powder
Fiberglass Fine Grinding
Flame Spray
Fine Wood Sanding
Flours
Fumed Silica
General Ventilation
Glass Making
Grain/Agriculture
Granite
Graphite
Grinding
Grit Blasting
Ground Powder
Gypsum
Hard Foam Dust
Incinerator Ash & Sand
Iron and Chrome
Iron Casting Sand
Laser Cutting Fumes
Lime Dust
Light Carbon Dust
Lumber Mills
Marble Dust
Metal
Metal Flame Spray
Mica
Mill Dust
Mill Transfer Points
Mining
Nickel Dust
Nickel Salt
Nuisance Dust
Paper
Phenolic Castings
Pigments
Plasma Cutting
Plasma Spray
Plaster Dust
Plastic Blast Beads
Plastic Media Blasting
Pneumatic Conveying Powder Spraying
PVC Grinding
Raw Agricultural Products Rubber Grinding
Rubber Recycling
Sand
Sand Blasting
Sanding
Sawdust
School Wood Shops
Seed Processing
Shot Blast Material
Silica
Starch
Steel De-burring
Steel Grit
Steel Shot Blast
Styrene Dust
Talc
Thermal Spray
Tire Manufacturing
Ventilation
Welding Fume
Wheel Blasting
Wood